Cone Winding

Cone Winding

1. Reciprocating cams which is attached with traversing guide and attached with a shat
2.  A drum is in opposite of every cone.
3.  Cones are placed on cone holder and kept on the contact of drum
4. Cam controls the yarn with yarn guide


Working principle

(A) Gets motion from motor in one side of machine and cam shaft and drum shaft rotates by motor pulley
(B) Yarn supply gets from a bobbin and yarn go to the cone by yarn stop motion guide and yarn traversing guide.
(C) Since cones are on holder and are contact with drum cones rotates due to the friction of drum and holder and become winding on yarn cone.
(D) This winding is controlled with yarn guide.
(E) Winding is stop with stop motion mechanism when yarn breakage.
(F) When cone gets predetermined width, discrete from drum contact automatically and placed new cone by taken out of the cones

Previous Post
Next Post
Related Posts