Pigment printing
In pigment printing, pigments that are not soluble and which do not have any action with fibers, on the top of the cloth, with the help of gum, the kind of design that is needed, the beds are given. Its emulsion before printing on the cloth (emulsion). In this emulsion, mix many types of chemicals and make the solution for the pie. They make two types of emulsions for printing.1 Oil - In-Water Emulsion
2 Water - In Oil Emulsion
The pigment printing has the importance of the substances given below
1. Pigment Deduction
2. Winder
3. Thicker and need chemicals to thicken paste.
Good pigment printing will be those qualities given below
1. Bright and good color value
2. Being soft in printed clothes
3. Good color fastness
Pigments used in printing are made of synthetic organic materials. Some pigments such as carbon black, titanium dioxide, copper and alluminium alloys and iron oxide are natural See you at the stage.
Printing in pigment is pure in three stages.
1. Printing
2. Drying clothes
3. Curing
Pigment printing does not require water at any stage. Pigment printing is mainly used in cellulose ether, sodium alijenet etc. Pigment printing can be used in the recipe recipe.
She gave down
Pigment x
Reduction thickner 1000 -5x / 2
Winder 3x / 2
Use one of the ingredients given below to print a single pigment emulsion of tepidity. This oil-in-water (water-n-water) is suspended.
1. Ekron Pigment Emulsion
2. Akon Bidders
3. Pidifiera as per the need to forget
4. Acid dropping catalysts like dye. Ammonium hydrogen phosphate
5. Kerosene
6. Water
Acron pigment emulsion
In this emulsion, very fine inorganic pigment occurs in the
dispersal phase. In this, the emulsifier is also mixed.
Akron Binders - It works in Binders Roller Rotary and Flatbed Printing.
Pidifix Fixer:
In the printing of artificial fibers or their blades, the fixer (1 - 3%) should be used.
Acid dropping catalyst
diammonium phosphate is the best catalyst
Kerosene
Use kerosene to make printing solution.
Water
Water is used to make a printing solution. Preparation of Reduction Binder
Preparation of Reduction Binder:
Aaron Binder- 10 Parts
Water - 9 parts
Kerosene - 81 parts
Total - 100 parts
Preparation of Solution for Printing:
Reduction binder - 95 partsAaron Pagment Emulsion-1 Part
Ketlist - 4 Parts
Total - 100 parts
After printing with the solution given above, do the curing for clothes for 4 minutes at 150 degree centigrade.
Advantages of Pigment Printing:
1) It can be used in all types of fibers.2) This printing is cheap, attracted and less time consuming.
3). No need to wash clothes after printing.
4) These colors are fixed.
5) Pigments can also use other colors